Direct tv hd dish installation

This signal is fed into where ever your home or business primary cable splitter junction box is — this could be the side of your home in a wiring box, in a utility room, laundry room or in the attic. Once the main satellite feed is connected to the SWM splitter, it is then fed through out the entire home in most cases through your existing COAX wiring — so no additional wiring is usually needed. They all communicate and work together through the same single wire SWM network.

We highly recommend you always have a professional install your DIRECTV systems, especially due to possible injury as well as the difficulty in aligning the satellite dish to our satellites.

All Rights Reserved. All other marks are the property of their respective owners. March 27, , am , Equipment. LNB "Eye". Back Assembly. Learn why people trust wikiHow. Download Article Explore this Article methods. Things You'll Need. Related Articles. Author Info Last Updated: August 10, Method 1. The number to order their service is Have the receiver installed in a location with an unblocked view of the southern sky.

Most satellite receivers are installed on a roof or balcony. If possible, trees and buildings should not block the receiver. Method 2. You may need a software program such as Adobe Reader to view the file. Follow national and local guidelines for installing your dish. There may be requirements or codes that restrict the size of your satellite dish or how high you can mount it. Find an appropriate location for your satellite receiver.

Look for a clear, southern-facing area with a high vantage spot. Find coordinates for pointing your dish to get reception. Connect your satellite receiver to the TV as specified in the receiver's manual. Connect both the television and satellite receiver to a power outlet. Turn them both on. If there is no switch, turn to UHF channel 14 or channel number 65 on cable.

Navigate the menu using buttons on the receiver's front panel and the receiver's manual to find the correct azimuth horizontal and elevation vertical coordinates. Determine and survey the dish's exact mounting site. Using the receiver's pointing coordinates, find the mounting site for your dish. Measure the number of feet meters of cable needed to finish the installation.

Start assembling the satellite receiver dish. Bolt or screw in the satellite's plastic or metal reflector to its support arm. This lets you preset the satellite to its correct elevation. Mount the mast, or pole, for the receiver. Multiple options exist for this step depending on where you install the dish roof, hollow wall, on brick or concrete, etc. Consult the self-installation guide to see instructions and the necessary tools for each option.

Make sure the mast is level to get a satellite signal. Use a bubble level to help you determine it is even. Put the satellite receiver dish on its mast. Attach the LNB to the receiver's support arm. Position a grounding block as closely as you can to the place where the dish's cable will run into the house. Run the receiver dish's cable to the grounding block. The connection to the block binds the dish to an acceptable grounded point in the main building ground, such as an enclosure for electrical service equipment or a metallic service raceway.

Run the RG-6 coaxial cable to the back of the receiver inside the house. The RG-6 cable should also be connected to the grounding block. Make sure a landline phone is off its hook to avoid getting an electric shock from any incoming calls.

Connect the receiver to a phone jack with the phone line. Check for a signal using the "Dish Pointing" menu's signal meter displayed on your TV screen.

Adjust the dish's pointing to achieve your maximum signal strength.